Attach Close-Mesh grating to structural shapes.

RSSGC "Close-Grip"
Priced as low as $2.52 each.

G-Clip model RSSGC is a 316-stainless steel grating fastener used to fasten close-mesh bar grating to structural shapes, where the structural flange is in a horizontal plane. Unit has a unique narrow width to accommodate very narrow (3/8") grating slots.

G-Clip model RSSGC- fastener consists of three parts, which are assembled at the factory into a complete installation unit, packed 50 units to a standard box.

Principal part is the body assembly, which has a female thread form in its upper portion. Body lower portion is die-stamped, with a single, die-cut, jaw facing upward, which contacts the underside of the structural member. Second part is the stamped round top, which fits over the grating upper surface. The body and top are joined by a 1/4" -20 threaded bolt, in proper length for the application.

Tools Required
G-Clips can be installed using a handheld 7/16" nut driver.

How to Order
Determine total height of grating. Describe grating configuration to specify proper top assembly to suit grating being installed.

Quantities recommended
We recommend using a grating fastened point for every four (4) square feet of grating, in average, pedestrian conditions. Where vibration is present more fasteners should be used. Grating manufacturers' recommendations should be consulted for further information.

Sizing Chart: